Stainless Steel Sanitary Horizontal Rotary Lobe Pump

consist of two lobe rotors which rotate synchronously inside a casing without touching each other.The two rotors divide the rotor chamber into to several smaller rooms and move in order as: a→b→c→d. At position a, only room Ⅰif filled with medium; at position b, some medium is closed in room B; at position C, some medium is also closed in room A, and at position d, room A and B are connected with room Ⅱ; here the medium is delivered to the outlet. With this circulation, the medium (material) is delivered through the pump continuously.

As the rotors rotate, the spaces between the lobes and the casing are successively filled with fluid, which is transported to the discharge nozzle with a fixed amount of displacement. The pumped fluid forms a continuous stream thanks to the tolerances between the lobes and the pump casing, thus ensuring an efficient pumping.
Materials
Parts in contact with the product AISI 
316L or 304 
Gaskets EPDM 
Mechanical seal graphite/Sic/EPDM 
SiC/C/EPDM 
Internal surface finish Ra ≤ 0.4 µm 
External surface finish bright polish
Options
Mechanical seals: SiC/SiC or TuC/SiC. 
Cooled mechanical seal, pressurised 
double mechanical seal, lip seal or O-
ring seal. 
Gaskets in EPDM or PTFE. 
Heating chamber (Jacket). 
Isolation can. 
Vertical support. 
Rectangular nozzle. 
Various kinds of drives and protections 
(gearbox drive with optional frequency 
converter. 
pulley/mechanical drive speed selector). 
Trolley and/or control panel.  Connections: clamp, SMS, RJT, etc.